HPE DL360 Gen11 vs Lenovo SR630 V4
A specification-by-specification comparison of the HPE ProLiant DL360 Gen11 and the Lenovo ThinkSystem SR630 V4, built from HPE’s and Lenovo’s own documents. 2 headline measures favour the DL360 Gen11, 2 favour the SR630 V4, and they share no processors.
Bottom line. DL360 Gen11 leads on storage density. SR630 V4 leads on virtualisation, network throughput. Neither vendor publishes benchmarks for these machines, so every call here is made on what their documents state.

The measures that decide it
Each row is a figure both vendors publish. Bars show the split between the two; a badge marks the larger figure, which is not always the better buy — a shallower chassis or a lower power ceiling can matter more.
Which one, and why
Drawn from the measures above and each model’s own data sheet. Neither vendor publishes benchmark results for these servers, so nothing here claims one is “faster”.
Choose the DL360 Gen11 if…
- Drive bays: 20 against 16 on the SR630 V4
- Largest power supply: 2,200 W against 2,000 W on the SR630 V4
- Two sockets and 32 DIMM slots in one rack unit: up to 64 cores per processor and 8 TB of DDR5, with 4 TB behind each socket.
Choose the SR630 V4 if…
- Cores, fully populated: 288 against 128 on the DL360 Gen11
- Fastest network option: 800 GbE class against 400 GbE class on the DL360 Gen11
- Two processor families in one 1U chassis: 27 Xeon 6 P-core SKUs of up to 86 cores, and seven 6700E E-core SKUs of up to 144 cores for thread-dense scale-out work.
Where each one pulls ahead
Calls made on documented capacity only — cores, memory, bays, accelerators and network options — with the figures behind each one shown.
Side by side, differences first
Everything both documents state, grouped. The default view hides rows where the two machines are identical.
Processors
Every processor each vendor lists for the model, from its own document.
| Specification | DL360 Gen11 | SR630 V4 |
|---|---|---|
| Processors listed | 58 | 34 |
| Most cores per processor | 64 | 144 |
| Highest processor TDP | 385 W | 350 W |
| Processor families | 5th Gen Xeon Scalable · 4th Gen Xeon Scalable | Xeon 6 P-core · Xeon 6 E-core |
Memory
| Specification | DL360 Gen11 | SR630 V4 |
|---|---|---|
| Fastest rated speed | 5,600 MT/s | 8,000 MT/s |
| Memory types | RDIMM DDR5-5600 · RDIMM DDR5-4800 | RDIMM DDR5-6400 · 3DS RDIMM DDR5-6400 · MRDIMM 8000 MHz (P-core CPUs only) · CXL 2.0 memory modules (E3.S 2T, P-core CPUs only) |
Storage
Bay counts are the maximum each document states, including rear and mid-chassis positions.
| Specification | DL360 Gen11 | SR630 V4 |
|---|---|---|
| Maximum bays | 20 | 16 |
| Documented layouts | 5 | 14 |
| Bay sizes | 3.5-inch · 2.5-inch · E3.S | 2.5-inch · E3.S |
| Boot devices | HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device · HPE NS204i-u v2 960GB NVMe Hot Plug Boot Optimized Storage Device · HPE NS204i-u v2 960GB NVMe SED Hot Plug Boot Optimized Storage Device + 3 more | Internal M.2 (2 drives): B550i-2i / B545i-2i / B350i-2i · Rear hot-swap M.2 (2 drives): B550p-2HS / B540p-2HS · Front hot-swap M.2 (2 drives): B550d-2HS / B540d-2HS |
| Storage controllers | 14 | 21 |
Accelerators & I/O
| Specification | DL360 Gen11 | SR630 V4 |
|---|---|---|
| Network cards listed | 39 | 30 |
Power & platform
| Specification | DL360 Gen11 | SR630 V4 |
|---|---|---|
| Power-supply options | 7 | 10 |
| Output range | 500–2,200 W | 800–2,000 W |
| Input types | AC · −48 V DC | AC · 277 VAC / HVDC · −48 V DC |
| Management | HPE iLO 6 | XClarity Controller 3 |
| Chassis depthVendors measure depth differently — see each data sheet | 8+2 SFF: 75.31 cm (29.65 in) | 788 mm (31 in.) |
Processors, memory, bays and power
The same charts each data sheet carries, drawn to the same scale so the two ranges can be read against each other.
DL360 Gen11: processors by cores and TDP
SR630 V4: processors by cores and TDP
DL360 Gen11: memory with every slot filled
SR630 V4: memory with every slot filled
DL360 Gen11: drive bays
Front panel
20 × EDSFF NVMe at the front — 20 bays in total.
SR630 V4: drive bays
Front panel
10 × 2.5" SAS/SATA at the front — 10 bays in total.
DL360 Gen11: power supplies
SR630 V4: power supplies
DL360 Gen11 vs SR630 V4, answered
Is the DL360 Gen11 or the SR630 V4 the faster server?
Neither document publishes benchmark results, so this page compares what they do state. The DL360 Gen11 lists 58 processors up to 64 cores at 385 W; the SR630 V4 lists 34 up to 144 cores at 350 W. Fully populated that is 128 cores against 288.
Which holds more memory?
The DL360 Gen11 has 32 DIMM slots and a stated ceiling of 8.0 TB. The SR630 V4 has 32 and 8 TB.
Which takes more drives?
DL360 Gen11: 20 bays across 5 documented layouts. SR630 V4: 16 across 14. Counts include rear and mid-chassis positions where the vendor documents them.
Can either take GPUs?
DL360 Gen11: up to 3 accelerators, 0 double-wide cards listed. SR630 V4: up to 3, 0 double-wide listed.
Do they share any processors?
No. The two documents list different processors, so a like-for-like processor build is not possible across these two.
Where these figures come from. DL360 Gen11: HPE ProLiant DL360 Gen11 QuickSpecs (Version 48 - 08-Sep-2026) (HPE document). SR630 V4: Lenovo ThinkSystem SR630 V4 Server Product Guide (September 8, 2026 (created or updated)) (Lenovo document). Each claim on this page is derived from those documents, checked page by page on the two data sheets, and carries no pricing.
Other comparisons in this class
Talk to a UK specialist
Get expert advice or a no-obligation quote — servers, storage, networking, maintenance, finance and cloud. We reply the same working day.
