Head-to-head · every figure from the vendor documents
HPE DL360 Gen10 vs HPE DL360 Gen12
A specification-by-specification comparison of the HPE ProLiant DL360 Gen10 and the HPE ProLiant Compute DL360 Gen12, built from HPE’s own documents. None of the headline measures favour the DL360 Gen10; 6 favour the DL360 Gen12, and they share no processors.
Bottom line. DL360 Gen12 leads on virtualisation, databases and in-memory work, storage density, AI and acceleration, network throughput. Neither vendor publishes benchmarks for these machines, so every call here is made on what their documents state.
Each row is a figure both vendors publish. Bars show the split between the two; a badge marks the larger figure, which is not always the better buy — a shallower chassis or a lower power ceiling can matter more.
DL360 Gen102
Processor sockets
DL360 Gen122
DL360 Gen1056
Cores, fully populated
Largest listed processor × its socket count
DL360 Gen12288Higher
DL360 Gen103 TB
Memory ceiling
As each document states it
DL360 Gen128 TBHigher
DL360 Gen1010
Drive bays
DL360 Gen1220Higher
DL360 Gen10Up to 2
Accelerators
DL360 Gen12Up to 3Higher
DL360 Gen101,600 W
Largest power supply
DL360 Gen122,200 WHigher
DL360 Gen101U Rack
Rack height
DL360 Gen121U Rack
DL360 Gen10100 GbE class
Fastest network option
DL360 Gen12400 GbE classHigher
02 — Verdict
Which one, and why
Drawn from the measures above and each model’s own data sheet. Neither vendor publishes benchmark results for these servers, so nothing here claims one is “faster”.
Choose the DL360 Gen10 if…
Nothing is cut from the compute half. A 113-row processor table, 112 rows of which, the same 24 DDR4 slots at twelve per socket, the same C621 chipset and the same iLO 5 silicon as the 2U DL380 Gen10 — so a pair of these in two rack units doubles the socket count and doubles the DIMM count against one DL380 Gen10 in the same space.
Choose the DL360 Gen12 if…
Cores, fully populated: 288 against 56 on the DL360 Gen10
Memory ceiling: 8 TB against 3 TB on the DL360 Gen10
Drive bays: 20 against 10 on the DL360 Gen10
Twenty E3.S NVMe bays in 1U — five front boxes that each take four E3.S or two U.3 SFF drives, and can be mixed.
03 — By workload
Where each one pulls ahead
Calls made on documented capacity only — cores, memory, bays, accelerators and network options — with the figures behind each one shown.
VirtualisationDL360 Gen10: 56 cores with 3 TB. DL360 Gen12: 288 cores with 8 TB.DL360 Gen12
Databases & in-memoryMemory ceiling 3 TB against 8 TB, across 24 and 32 DIMM slots.DL360 Gen12
Storage density10 bays in 1U against 20 in 1U.DL360 Gen12
AI & acceleration2 accelerators against 3 in the vendor documents.DL360 Gen12
Network throughputFastest card listed: 100 GbE class against 400 GbE class.DL360 Gen12
04 — Specifications
Side by side, differences first
Everything both documents state, grouped. The default view hides rows where the two machines are identical.
Processors
Every processor each vendor lists for the model, from its own document.
Specification
DL360 Gen10
DL360 Gen12
Processors listed
113
33
Most cores per processor
28
144
Highest processor TDP
205 W
350 W
Processor families
2nd Gen Intel Xeon Scalable (Platinum) · 1st Gen Intel Xeon Scalable (Platinum) · 2nd Gen Intel Xeon Scalable (Gold) · 1st Gen Intel Xeon Scalable (Gold) · 2nd Gen Intel Xeon Scalable (Silver) · 1st Gen Intel Xeon Scalable (Silver) · 2nd Gen Intel Xeon Scalable (Bronze) · 1st Gen Intel Xeon Scalable (Bronze)
Xeon 6 E-core · Xeon 6 P-core
Memory
Specification
DL360 Gen10
DL360 Gen12
DIMM slots
24
32
Slots per processor
12
16
Largest module listed
512 GB
256 GB
Fastest rated speed
2,933 MT/s
6,400 MT/s
Memory types
RDIMM DDR4-2933 (2nd Gen Intel Xeon Scalable only) · RDIMM DDR4-2666 (1st Gen Intel Xeon Scalable only) · LRDIMM DDR4-2933 · HPE Persistent Memory (2666 MT/s) + 1 more
RDIMM DDR5-6400
Storage
Bay counts are the maximum each document states, including rear and mid-chassis positions.
Specification
DL360 Gen10
DL360 Gen12
Maximum bays
10
20
Documented layouts
14
5
Bay sizes
2.5-inch · 3.5-inch
2.5-inch · E3.S · 3.5-inch
Boot devices
HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device · 2 x M.2 2280 SATA on the HPE DL360 Gen10 SATA M.2 2280 Riser Kit (867978-B21) · Up to 4 x M.2 via 2 Dual uFF cartridges in the Universal Media Bay (867970-B21), or 2 x M.2 via a Dual uFF carrier in the rear bay (867972-B21) + 2 more
HPE NS204i-u v2 480GB NVMe Hot Plug Boot Optimized Storage Device · HPE NS204i-u v2 960GB NVMe Hot Plug Boot Optimized Storage Device · HPE NS204i-u v2 960GB NVMe SED Hot Plug Boot Optimized Storage Device + 3 more
Storage controllers
18
14
Accelerators & I/O
Specification
DL360 Gen10
DL360 Gen12
Accelerators supported
Up to 2
Up to 3
OCP slots
0
2
Network cards listed
11
38
Power & platform
Specification
DL360 Gen10
DL360 Gen12
Power-supply options
7
5
Output range
500–1,600 W
800–2,200 W
Management
HPE iLO 5
HPE iLO 7
Chassis depthVendors measure depth differently — see each data sheet
SFF drives: 4.29 x 43.46 x 70.7 cm (1.69 x 17.11 x 27.83 in)
(8+2) SFF: 75.31 cm (29.65 in)
05 — The data
Processors, memory, bays and power
The same charts each data sheet carries, drawn to the same scale so the two ranges can be read against each other.
DL360 Gen10: processors by cores and TDP
2nd Gen Intel Xeon Scalable (Platinum) 141st Gen Intel Xeon Scalable (Platinum) 122nd Gen Intel Xeon Scalable (Gold) 471st Gen Intel Xeon Scalable (Gold) 222nd Gen Intel Xeon Scalable (Silver) 91st Gen Intel Xeon Scalable (Silver) 52nd Gen Intel Xeon Scalable (Bronze) 21st Gen Intel Xeon Scalable (Bronze) 2Bubble size = L3 cache · hover a bubble for the full SKU
DL360 Gen12: processors by cores and TDP
Xeon 6 E-core 7Xeon 6 P-core 26Bubble size = L3 cache · hover a bubble for the full SKU
DL360 Gen10: memory with every slot filled
DL360 Gen12: memory with every slot filled
DL360 Gen10: drive bays
Front panel
10 × 2.5" SAS/SATA + NVMe at the front — 10 bays in total.
SAS/SATANVMeSAS/SATA + NVMe
DL360 Gen12: drive bays
Front panel
8 × 2.5" SAS/SATA + NVMe at the front — 8 bays in total.
SAS/SATANVMeSAS/SATA + NVMe
DL360 Gen10: power supplies
AC−48 V DC
DL360 Gen12: power supplies
AC−48 V DC
07 — Questions
DL360 Gen10 vs DL360 Gen12, answered
Is the DL360 Gen10 or the DL360 Gen12 the faster server?
Neither document publishes benchmark results, so this page compares what they do state. The DL360 Gen10 lists 113 processors up to 28 cores at 205 W; the DL360 Gen12 lists 33 up to 144 cores at 350 W. Fully populated that is 56 cores against 288.
Which holds more memory?
The DL360 Gen10 has 24 DIMM slots and a stated ceiling of 3.0 TB. The DL360 Gen12 has 32 and 8.0 TB.
Which takes more drives?
DL360 Gen10: 10 bays across 14 documented layouts. DL360 Gen12: 20 across 5. Counts include rear and mid-chassis positions where the vendor documents them.
Can either take GPUs?
DL360 Gen10: up to 2 accelerators, 0 double-wide cards listed. DL360 Gen12: up to 3, 0 double-wide listed.
Do they share any processors?
No. The two documents list different processors, so a like-for-like processor build is not possible across these two.
Where these figures come from. DL360 Gen10: HPE ProLiant DL360 Gen10 Server QuickSpecs (a00008159enw, Version 74 — 18 May 2026) (HPE document). DL360 Gen12: HPE ProLiant Compute DL360 Gen12 QuickSpecs (Version 18 - 03-Aug-2026) (HPE document). Each claim on this page is derived from those documents, checked page by page on the two data sheets, and carries no pricing.