HPE DL560 Gen11 vs Lenovo SR850 V3
A specification-by-specification comparison of the HPE ProLiant DL560 Gen11 and the Lenovo ThinkSystem SR850 V3, built from HPE’s and Lenovo’s own documents. None of the headline measures favour the DL560 Gen11; 2 favour the SR850 V3, and 9 processors appear in both lists.
Bottom line. SR850 V3 leads on AI and acceleration. Neither vendor publishes benchmarks for these machines, so every call here is made on what their documents state.

The measures that decide it
Each row is a figure both vendors publish. Bars show the split between the two; a badge marks the larger figure, which is not always the better buy — a shallower chassis or a lower power ceiling can matter more.
Which one, and why
Drawn from the measures above and each model’s own data sheet. Neither vendor publishes benchmark results for these servers, so nothing here claims one is “faster”.
Choose the DL560 Gen11 if…
- 240 cores from four 60-core Platinum 8490H processors, with sixteen DIMM slots per socket, in a 2U chassis.
Choose the SR850 V3 if…
- Accelerators: Up to 4 against Up to 2 on the DL560 Gen11
- Largest power supply: 2,700 W against 2,200 W on the DL560 Gen11
- Four sockets, up to 240 cores and 64 DIMM slots (16 TB) in a chassis only 87 mm high.
Where each one pulls ahead
Calls made on documented capacity only — cores, memory, bays, accelerators and network options — with the figures behind each one shown.
Side by side, differences first
Everything both documents state, grouped. The default view hides rows where the two machines are identical.
Processors
Every processor each vendor lists for the model, from its own document.
| Specification | DL560 Gen11 | SR850 V3 |
|---|---|---|
| Processors listed | 9 | 10 |
Memory
| Specification | DL560 Gen11 | SR850 V3 |
|---|---|---|
| Largest module listed | 256 GB | 128 GB |
| Fastest rated speed | 4,800 MT/s | 5,600 MT/s |
| Memory types | RDIMM DDR5-4800 | RDIMM DDR5-4800 · 9x4 RDIMM · 3DS RDIMM |
Storage
Bay counts are the maximum each document states, including rear and mid-chassis positions.
| Specification | DL560 Gen11 | SR850 V3 |
|---|---|---|
| Documented layouts | 4 | 2 |
| Bay sizes | 2.5-inch · E3.S | 2.5-inch |
| Boot devices | HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device · HPE ProLiant DL560 Gen11 NS204i-u Front Enablement Kit · HPE ProLiant DL380a/DL560 Gen11 NS204i-u Rear Enablement Kit | M.2 SATA/NVMe 2-Bay Enablement Kit (4Y37A09738) · M.2 SATA/x4 NVMe 2-Bay Adapter (4Y37A79663) · M.2 NVMe 2-Bay RAID Adapter (4Y37A09750) + 2 more |
| Storage controllers | 12 | 16 |
Accelerators & I/O
| Specification | DL560 Gen11 | SR850 V3 |
|---|---|---|
| Accelerators supported | Up to 2 | Up to 4 |
| Double-wide cards listed | 1 | 0 |
| PCIe network slots | 6 | 12 |
| Network cards listed | 33 | 29 |
Power & platform
| Specification | DL560 Gen11 | SR850 V3 |
|---|---|---|
| Power-supply options | 5 | 12 |
| Output range | 800–2,200 W | 1,100–2,700 W |
| Input types | AC · −48 V DC | AC · 277 VAC / HVDC · −48 V DC |
| Management | HPE iLO 6 | XClarity Controller 2 |
| Chassis depthVendors measure depth differently — see each data sheet | 80.6 cm (31.75 in) deep (SFF CTO servers: 8.75 x 43.3 x 80.6 cm) | 902 mm |
Processors, memory, bays and power
The same charts each data sheet carries, drawn to the same scale so the two ranges can be read against each other.
DL560 Gen11: processors by cores and TDP
SR850 V3: processors by cores and TDP
DL560 Gen11: memory with every slot filled
SR850 V3: memory with every slot filled
DL560 Gen11: drive bays
Front panel
12 × EDSFF NVMe at the front — 12 bays in total.
SR850 V3: drive bays
Front panel
8 × 2.5" SAS/SATA at the front — 8 bays in total.
DL560 Gen11: power supplies
SR850 V3: power supplies
9 processors you can order in either
Both vendor documents list these parts, so a build can be matched across the two and the comparison comes down to the chassis: 0 more are exclusive to the DL560 Gen11 and 1 to the SR850 V3.
| Processor | Cores | TDP |
|---|---|---|
| Intel Xeon-Platinum 8490H | 60 | 350 W |
| Intel Xeon-Platinum 8468H | 48 | 330 W |
| Intel Xeon-Platinum 8460H | 40 | 330 W |
| Intel Xeon-Gold 6448H | 32 | 250 W |
| Intel Xeon-Platinum 8450H | 28 | 250 W |
| Intel Xeon-Gold 6418H | 24 | 185 W |
| Intel Xeon-Gold 6416H | 18 | 165 W |
| Intel Xeon-Platinum 8444H | 16 | 270 W |
| Intel Xeon-Gold 6434H | 8 | 195 W |
DL560 Gen11 vs SR850 V3, answered
Is the DL560 Gen11 or the SR850 V3 the faster server?
Neither document publishes benchmark results, so this page compares what they do state. The DL560 Gen11 lists 9 processors up to 60 cores at 350 W; the SR850 V3 lists 10 up to 60 cores at 350 W. Fully populated that is 240 cores against 240.
Which holds more memory?
The DL560 Gen11 has 64 DIMM slots and a stated ceiling of 16.0 TB. The SR850 V3 has 64 and 16 TB.
Which takes more drives?
DL560 Gen11: 24 bays across 4 documented layouts. SR850 V3: 24 across 2. Counts include rear and mid-chassis positions where the vendor documents them.
Can either take GPUs?
DL560 Gen11: up to 2 accelerators, 1 double-wide cards listed. SR850 V3: up to 4, 0 double-wide listed.
Do they share any processors?
Yes — 9 processors appear in both documents, including the Intel Xeon-Platinum 8490H. That makes a like-for-like build possible on either server.
Where these figures come from. DL560 Gen11: HPE ProLiant DL560 Gen11 QuickSpecs (Version 33 - 03-Aug-2026) (HPE document). SR850 V3: Lenovo ThinkSystem SR850 V3 Server Product Guide (publication date is not printed in the text export) (Lenovo document). Each claim on this page is derived from those documents, checked page by page on the two data sheets, and carries no pricing.
Other comparisons in this class
Talk to a UK specialist
Get expert advice or a no-obligation quote — servers, storage, networking, maintenance, finance and cloud. We reply the same working day.
