Catalyst 9200 End of Life Status: Still Current

Catalyst 9200 support dates

Every row names its basis. A third-party tracker date is not the vendor’s own, and “not published” means exactly that.
Milestone	Date	Basis	Source
End-of-Sale Date (switch hardware)	—	Not yet announcedAs of 2026-10-08, Cisco's 9200 EoL/EoS notice listing has no hardware switch notice. It lists only IOS XE releases (16.9.x to 17.17.x), Cisco ONE C9200 DNA Advantage term licences and Catalyst NW EDU licences. The series status is 'Available'.	Cisco Catalyst 9200 Series Switches - End-of-Life and End-of-Sale Notices
Last Date of Support (switch hardware)	—	Not yet announcedNot set until Cisco issues an EoL bulletin. Cisco's EoL policy provides five years of TAC support and replacement parts for hardware from the End-of-Sale date, for customers with active contracts.	Cisco End-of-Life Policy

Where the Catalyst 9200 stands today

The 9200 Series was released on 13 November 2018, and Cisco's support series page now lists 31 switch models, none marked end-of-sale. The 9200 notice listing holds only software and licence items (IOS XE releases from 16.9.x to 17.17.x, Cisco ONE C9200 DNA Advantage term licences and Catalyst NW EDU licences), and Cisco updated the data sheet on 1 September 2026. If Cisco does announce end-of-sale, its end-of-life policy provides five years of TAC support and replacement parts from the End-of-Sale date to customers with active contracts, so an announcement would start a runway of about five years, not an immediate cut-off.

Once Cisco issues a bulletin, dates will attach to each product ID, so the PID is the thing to track. For an exact PID such as C9200L-48P-4X-E, check the 9200 notice listing and the series page model list for a notice covering it; for other hardware in the same estate, use the server and network end-of-life checker. Warranty and Cisco contract coverage run separately, per unit serial number.

Catalyst 9200: lifecycle on one axis

Dated milestones are placed only where a source gives the date; milestones the vendor has not dated are listed beneath the axis rather than guessed. Blue = vendor-published, amber = third-party tracker, violet = derived from a vendor policy. Checked 8 October 2026.

Finding the date for your own unit

There is no model-wide end date yet, because Cisco has published no hardware EoL bulletin for the 9200. To check whether one has appeared for your exact PID (e.g. C9200L-48P-4X-E), look at Cisco's notice listing (https://www.cisco.com/c/en/us/products/switches/catalyst-9200-series-switches/eos-eol-notice-listing.html) and the model list on the series page (https://www.cisco.com/c/en/us/support/switches/catalyst-9200-series-switches/series.html). Cisco lifecycle dates are per PID. Warranty and contract coverage run per unit serial number.

What still works after Cisco support ends

Because the hardware is current, the limits on a 9200 today come from IOS XE, whose release trains carry their own end-of-life dates. IOS XE 17.9.x, under EOL15188 on the 9200 notice page, reached End of Vulnerability/Security Support on 30 September 2026 and has a Last Date of Support of 31 March 2027; Cisco encourages migration to 17.12.1 or above. Cisco's recommended releases for every C9200, C9200L and C9200CX model are 17.18.4 and 17.15.6 (page updated 4 September 2026). Cisco may also provide free software updates, typically for Critical- and High-severity advisories and decided case by case, which eligible customers without a contract obtain through TAC by quoting the advisory URL.

Cisco's 9200 ordering guide (updated 1 September 2026) sets out several service routes. Solution Support is 'strongly recommended' and covers the Cisco DNA Essentials and Advantage software licences. Smart Net Total Care carries a 1-hour TAC response objective for Severity 1 and 2 cases, against four hours for the support included with the Catalyst software subscription, with eight RMA service-level options. Partner Support Service is listed as a product-level hardware option, and Success Tracks through CX Cloud are positioned for a 30-minute Severity 1/2 objective with all eight RMA options. New units ship with the Enhanced Limited Lifetime Warranty, giving next-business-day delivery of replacement hardware where available plus 90 days of 8x5 TAC; Cisco's warranty FAQ says it lasts while the original end user owns or uses the switch, cannot be transferred and, on discontinuance, is limited to five years.

Software release trains have their own EoL dates, separate from the hardware. IOS XE 17.9.x (EOL15188, listed on the 9200 notice page) reached End of Vulnerability/Security Support on 30 Sep 2026 and has a Last Date of Support of 31 Mar 2027. Cisco encourages migration to 17.12.1 or above. (cisco.com)
Cisco's recommended releases for C9200, C9200L and C9200CX (all models) are 17.18.4 and 17.15.6 (page updated 4 Sep 2026). (cisco.com)
Cisco may provide free software updates, typically for Critical- and High-severity advisories and decided case by case. Eligible customers without a contract get them via Cisco TAC with the advisory URL. Past a product's LDoS, PSIRT will not analyse or fix vulnerabilities. (sec.cloudapps.cisco.com)

Vendor support you can still buy

Cisco Solution Support — Cisco's 9200 ordering guide (updated 1 Sep 2026) says Solution Support is 'strongly recommended' and covers Cisco DNA Essentials and Advantage software licences (cisco.com)
Cisco Smart Net Total Care — Listed among the available service options. The guide gives a 1-hour Sev 1/2 TAC response objective (versus four hours for the Catalyst software subscription's included support) and eight RMA service-level options. (cisco.com)
Cisco Partner Support Service — Listed as 'partner service support', a product-level hardware support option (cisco.com)
Cisco Success Tracks (via CX Cloud) — Positioned for a 30-minute Sev 1/2 response objective and all eight of Cisco's RMA options (as fast as two hours) (cisco.com)

What a maintenance contract needs to cover on the Catalyst 9200

The 9200 Series is three sub-families, and a maintenance contract needs to know which one each unit belongs to. The C9200 supports dual field-replaceable supplies (PWR-C6-125WAC, 600WAC or 1KWAC, with PWR-C6-715WDC= as a spare only), field-replaceable fans and field-replaceable uplink modules: C9200-NM-4G (not on PXG models), NM-4X, NM-2Q and NM-2Y (PXG models only). The C9200L uses PWR-C5 supplies with fixed fans and fixed uplinks of 4x1G, 4x1/10G or 2x1/10/25G. The fanless C9200CX compact models have 8 or 12 ports and a fixed internal 315 W supply.

Stacking rules decide which spares will work. The C9200 uses StackWise-160 and the C9200L StackWise-80, each with up to eight members; Cisco's data sheet says the two cannot be stacked together, and the C9200CX does not stack at all, so a replacement stack member must come from the same sub-family. PoE+ runs at up to 30 W per port with power mapping up to 1,440 W, and the C9200CX multigigabit models offer UPOE / 802.3bt Class 6 at 60 W. Scope Cisco third-party maintenance for a 9200 estate against that inventory.

Catalyst 9200: what to tell a maintenance provider

The hardware facts a maintenance quote is priced on, printed in the vendor's own wording from its specification documents (cited in Sources). Nothing on this plate is estimated; facts the vendor does not state are left off rather than filled in.

Catalyst 9200 hardware, from Cisco’s own specification documents
Specification	Detail	Source
Form factor	The C9200 chassis is 1.73 x 17.5 x 13.8 in (4.4 x 44.5 x 35.0 cm). C9200L 4G/4X models are 11.3 in deep (PXG models 13.8 in). C9200CX compact models are fanless, with 8 or 12 ports.	cisco.com
Access ports	24 or 48 downlink ports in data, PoE+, UPOE and multigigabit variants. PXG models have 8 mGig ports (up to 10G) plus 16 or 40 ports at up to 1G.	cisco.com
Uplinks	C9200 takes field-replaceable network modules: C9200-NM-4G (4x1G; not on PXG models), C9200-NM-4X (4x1/10G), C9200-NM-2Q (2x40G) and C9200-NM-2Y (2x25G; PXG models only). C9200L has fixed 4x1G, 4x1/10G or 2x1/10/25G uplinks.	cisco.com
Stacking	StackWise-160 (C9200) or StackWise-80 (C9200L), up to 8 members. C9200 and C9200L cannot be stacked together, and C9200CX cannot stack.	cisco.com
Power supplies	C9200 supports dual field-replaceable supplies (PWR-C6-125WAC / 600WAC / 1KWAC, plus PWR-C6-715WDC= as a spare only) and field-replaceable fans. C9200L uses PWR-C5-* supplies with fixed fans. C9200CX has a fixed internal 315 W supply.	cisco.com
PoE	PoE+ at up to 30 W per port. Power mapping scales up to a maximum of 1,440 W of PoE+. UPOE / 802.3bt Class 6 (60 W) on C9200CX mGig models.	cisco.com
Memory and storage	C9200: 4 GB DRAM, 4 GB flash. C9200L: 2 GB DRAM, 4 GB flash. C9200CX: 4 GB DRAM, 8 GB flash.	cisco.com
Software and licensing	Cisco IOS XE 16.9.2 or later. Perpetual Network Essentials or Network Advantage licence plus a 3-, 5- or 7-year Cisco DNA Essentials or Advantage subscription.	cisco.com

Extend or refresh the Catalyst 9200?

For a 9200, maintaining rather than replacing is the sensible default. Cisco still sells the platform and includes it in its current recommended-release matrix, there is no announced Cisco cut-off for Cisco or third-party cover on existing units, and an eventual end-of-sale would leave contract holders about five years of Cisco hardware support. Extending cover matters most for switches bought second-hand, since E-LLW cannot be transferred; a quote for a mixed C9200, C9200L and C9200CX estate can be built with the maintenance coverage builder.

No lifecycle deadline forces a 9200 refresh; software is what needs attention. The urgent item is any unit still on 17.9.x, which should move to a supported train such as 17.15.x or 17.18.x now that its security support has ended. 9200 licensing also pairs a perpetual Network Essentials or Network Advantage licence with a 3-, 5- or 7-year Cisco DNA Essentials or Advantage subscription, and that subscription term is worth tracking alongside hardware cover. The signal to start planning replacement is a hardware end-of-sale bulletin on Cisco's 9200 notice listing.

Cisco has announced no hardware end-of-sale for the 9200. The series is still orderable, and Cisco includes it in its current recommended-release matrix, so Cisco or third-party coverage on existing units does not face an announced Cisco cut-off. (cisco.com)
When Cisco does announce end-of-sale, its EoL policy gives five years of hardware TAC support and replacement parts from the End-of-Sale date, so an announcement would start a support runway of about five years. (cisco.com)
Units still on IOS XE 17.9.x are past that train's End of Vulnerability/Security Support (30 Sep 2026), even though the hardware is current. Move to a supported train such as 17.15.x or 17.18.x. (cisco.com)
C9200 and C9200L use different stacking (StackWise-160 vs StackWise-80) and cannot be mixed in one stack. Spares and replacements must match the sub-family. (cisco.com)
The switches ship with Cisco's Enhanced Limited Lifetime hardware warranty (E-LLW): NBD delivery of replacement hardware where available, plus 90 days of 8x5 TAC. (cisco.com)
Cisco's warranty FAQ says E-LLW lasts as long as the original end user continues to own or use the product, and that it cannot be transferred. On discontinuance, warranty support is limited to 5 years, ending at the Last Date of Service set by the EoL process. (cisco.com)

Catalyst 9200: what came before and what replaces it

No successor is shown because none could be sourced.

Keep your Catalyst 9200 covered

Tell us how many you run and when your current cover ends, and we will come back with a like-for-like maintenance quote for that estate. Your model and its support status are attached to the enquiry automatically, so there is nothing to re-type.

Cisco maintenance in detail →

In Cisco's lineup the 9200 follows the 2960-X, whose dates are on the Catalyst 2960-X end of life page: Cisco's 2960-X bulletin (EOL13603) maps 2960-X part numbers to Catalyst 9200L replacements, and the 2960-X series page recommends the 9200 Series. Within the Catalyst 9000 family, the 9200's own sub-families (C9200, C9200L, C9200CX) differ enough in stacking, power and uplinks to be treated as separate products for spares. Readers weighing the 9200 against the 9300 Series can compare lifecycle positions on the Catalyst 9300 end of life page.

Where the Catalyst 9200 sits against related models

Each bar runs from release to the milestone that marks end of support for the model as a whole. Amber bars end on a third-party tracker's date, not the vendor's. A dashed open end means no end date is published — not that support is indefinite. Component and accessory dates (a management controller, a power module) are not treated as the model's.

Look up another model in the server & network end-of-life checker, or read what third-party maintenance covers.

Questions people ask about the Catalyst 9200

Is the Cisco Catalyst 9200 end of life?

No. All three sub-families, C9200, C9200L and C9200CX, are still sold: the series page shows Product Status 'Available' and marks none of its 31 listed models end-of-sale. Cisco's 9200 notice listing carries only software and licence notices, so Cisco has set no hardware end-of-sale or end-of-support date.

Does the Catalyst 9200 have an end-of-support date?

Not yet. Cisco has not set one, and will not until it issues an end-of-life bulletin. Its end-of-life policy provides five years of hardware TAC support and replacement parts, counted from the End-of-Sale date, for customers with active contracts, so that clock will run from the End-of-Sale date in whichever bulletin eventually covers your PID.

Is IOS XE 17.9 still supported on the Catalyst 9200?

IOS XE 17.9.x passed End of Vulnerability/Security Support on 30 September 2026 and reaches its Last Date of Support on 31 March 2027. Cisco encourages moving to 17.12.1 or above, and its recommended releases for all C9200, C9200L and C9200CX models are 17.18.4 and 17.15.6.

Can a C9200 and a C9200L be stacked together?

No. The C9200 uses StackWise-160 and the C9200L StackWise-80, and Cisco's data sheet says they cannot be stacked together; the compact C9200CX cannot stack. Spares and replacements for a stack must match the sub-family.

Is third-party maintenance an option for a Catalyst 9200?

A third-party maintenance quote can be requested for C9200, C9200L and C9200CX switches; such contracts generally cover fault diagnosis, replacement parts and engineers. Because C9200 and C9200L switches cannot share a stack and the C9200CX does not stack, the request should list each unit's sub-family and PID.

Sources

Every date, rule and specification above was checked against these on 8 October 2026 by an independent verification pass. Vendors revise lifecycle notices; this page is re-checked by 8 January 2027.

Cisco Catalyst 9200 Series Switches - End-of-Life and End-of-Sale Notices — cisco.com
Cisco End-of-Life Policy — cisco.com
Catalyst 9200 release — cisco.com
cisco.com — cisco.com
cisco.com — cisco.com
sec.cloudapps.cisco.com — sec.cloudapps.cisco.com
Cisco Solution Support — cisco.com
cisco.com — cisco.com
cisco.com — cisco.com

Last reviewed 7 October 2026. Lifecycle dates for the Catalyst 9200 are re-verified against Cisco's own notices at each review; a date a vendor has not published is never filled in.