Head-to-head · every figure from the vendor documents
HPE DL380 Gen10 vs HPE DL380a Gen11
A specification-by-specification comparison of the HPE ProLiant DL380 Gen10 and the HPE ProLiant DL380a Gen11, built from HPE’s own documents. 1 headline measure favours the DL380 Gen10, 2 favour the DL380a Gen11, and they share no processors.
Bottom line. DL380 Gen10 leads on storage density. DL380a Gen11 leads on virtualisation, network throughput. Neither vendor publishes benchmarks for these machines, so every call here is made on what their documents state.
Each row is a figure both vendors publish. Bars show the split between the two; a badge marks the larger figure, which is not always the better buy — a shallower chassis or a lower power ceiling can matter more.
DL380 Gen102
Processor sockets
DL380a Gen112
DL380 Gen1056
Cores, fully populated
Largest listed processor × its socket count
DL380a Gen11128Higher
DL380 Gen103 TB
Memory ceiling
As each document states it
DL380a Gen113 TB
DL380 Gen1024Higher
Drive bays
DL380a Gen118
DL380 Gen10Up to 8
Accelerators
DL380a Gen11Up to 8
DL380 Gen102,200 W
Largest power supply
DL380a Gen112,200 W
DL380 Gen102U Rack
Rack height
DL380a Gen112U Rack
DL380 Gen10100 GbE class
Fastest network option
DL380a Gen11400 GbE classHigher
02 — Verdict
Which one, and why
Drawn from the measures above and each model’s own data sheet. Neither vendor publishes benchmark results for these servers, so nothing here claims one is “faster”.
Choose the DL380 Gen10 if…
Drive bays: 24 against 8 on the DL380a Gen11
Expansion is the whole argument for this chassis. Three riser positions carry as many as eight PCIe 3.0 slots, and the pair of x16/x16/x16 GPU riser kits each take three single-width accelerators — six across two processors. The 1U DL360 Gen10, built from the identical processor table, reaches three slots in total.
Choose the DL380a Gen11 if…
Cores, fully populated: 128 against 56 on the DL380 Gen10
Fastest network option: 400 GbE class against 100 GbE class on the DL380 Gen10
Four double-wide or eight single-wide accelerators in a 2U chassis, with six NVIDIA and Intel cards in HPE’s GPU table spanning the 72 W L4 to the 400 W H100 NVL.
03 — By workload
Where each one pulls ahead
Calls made on documented capacity only — cores, memory, bays, accelerators and network options — with the figures behind each one shown.
VirtualisationDL380 Gen10: 56 cores with 3 TB. DL380a Gen11: 128 cores with 3 TB.DL380a Gen11
Databases & in-memoryMemory ceiling 3 TB against 3 TB, across 24 and 24 DIMM slots.Line ball
Storage density24 bays in 2U against 8 in 2U.DL380 Gen10
AI & acceleration8 accelerators against 8 in the vendor documents.Line ball
Network throughputFastest card listed: 100 GbE class against 400 GbE class.DL380a Gen11
04 — Specifications
Side by side, differences first
Everything both documents state, grouped. The default view hides rows where the two machines are identical.
Processors
Every processor each vendor lists for the model, from its own document.
Specification
DL380 Gen10
DL380a Gen11
Processors listed
113
41
Most cores per processor
28
64
Highest processor TDP
205 W
350 W
Processor families
2nd Gen Intel Xeon Scalable (Platinum) · 1st Gen Intel Xeon Scalable (Platinum) · 2nd Gen Intel Xeon Scalable (Gold) · 1st Gen Intel Xeon Scalable (Gold) · 2nd Gen Intel Xeon Scalable (Silver) · 1st Gen Intel Xeon Scalable (Silver) · 2nd Gen Intel Xeon Scalable (Bronze) · 1st Gen Intel Xeon Scalable (Bronze)
4th Gen Xeon Scalable · 5th Gen Xeon Scalable
Single-processor option
Yes
No
Memory
Specification
DL380 Gen10
DL380a Gen11
Largest module listed
512 GB
128 GB
Fastest rated speed
2,933 MT/s
5,600 MT/s
Memory types
RDIMM DDR4-2933 (2nd Gen Intel Xeon Scalable only) · RDIMM DDR4-2666 (1st Gen Intel Xeon Scalable only) · LRDIMM DDR4-2933 · Intel Optane Persistent Memory for HPE (2666 MT/s) + 1 more
Bay counts are the maximum each document states, including rear and mid-chassis positions.
Specification
DL380 Gen10
DL380a Gen11
Maximum bays
24
8
Documented layouts
15
2
Bay sizes
2.5-inch · 3.5-inch
2.5-inch · E3.S
Boot devices
HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device · 2 x M.2 SATA on the default primary riser; RAID 1 requires HPE FIO Enable Smart Array SW RAID (784308-B21) · HPE Smart Array S100i SR Gen10 SW RAID (embedded, 14 SATA ports of which 12 accessible) + 1 more
HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device
Storage controllers
15
5
Accelerators & I/O
Specification
DL380 Gen10
DL380a Gen11
Double-wide cards listed
14
0
OCP slots
0
2
PCIe network slots
8
4
Network cards listed
22
32
Power & platform
Specification
DL380 Gen10
DL380a Gen11
Power-supply options
8
2
Output range
500–2,200 W
1,600–2,200 W
Input types
AC · −48 V DC · 277 VAC / HVDC
AC
Management
HPE iLO 5
HPE iLO 6
Chassis depthVendors measure depth differently — see each data sheet
SFF drives: 8.73 x 44.54 x 67.94 cm (3.44 x 17.54 x 26.75 in)
81.6 cm / 32.13 in deep (server)
05 — The data
Processors, memory, bays and power
The same charts each data sheet carries, drawn to the same scale so the two ranges can be read against each other.
DL380 Gen10: processors by cores and TDP
2nd Gen Intel Xeon Scalable (Platinum) 141st Gen Intel Xeon Scalable (Platinum) 112nd Gen Intel Xeon Scalable (Gold) 471st Gen Intel Xeon Scalable (Gold) 232nd Gen Intel Xeon Scalable (Silver) 91st Gen Intel Xeon Scalable (Silver) 52nd Gen Intel Xeon Scalable (Bronze) 21st Gen Intel Xeon Scalable (Bronze) 2Bubble size = L3 cache · hover a bubble for the full SKU
DL380a Gen11: processors by cores and TDP
4th Gen Xeon Scalable 235th Gen Xeon Scalable 18Bubble size = L3 cache · hover a bubble for the full SKU
DL380 Gen10: memory with every slot filled
DL380a Gen11: memory with every slot filled
DL380 Gen10: drive bays
Front panel
24 × 2.5" SAS/SATA at the front — 24 bays in total.
SAS/SATANVMeSAS/SATA + NVMe
DL380a Gen11: drive bays
Front panel
8 × EDSFF NVMe at the front — 8 bays in total.
SAS/SATANVMeSAS/SATA + NVMe
DL380 Gen10: power supplies
AC277 VAC / HVDC−48 V DC
DL380a Gen11: power supplies
AC
07 — Questions
DL380 Gen10 vs DL380a Gen11, answered
Is the DL380 Gen10 or the DL380a Gen11 the faster server?
Neither document publishes benchmark results, so this page compares what they do state. The DL380 Gen10 lists 113 processors up to 28 cores at 205 W; the DL380a Gen11 lists 41 up to 64 cores at 350 W. Fully populated that is 56 cores against 128.
Which holds more memory?
The DL380 Gen10 has 24 DIMM slots and a stated ceiling of 3.0 TB. The DL380a Gen11 has 24 and 3.0 TB.
Which takes more drives?
DL380 Gen10: 24 bays across 15 documented layouts. DL380a Gen11: 8 across 2. Counts include rear and mid-chassis positions where the vendor documents them.
Can either take GPUs?
DL380 Gen10: up to 8 accelerators, 14 double-wide cards listed. DL380a Gen11: up to 8, 0 double-wide listed.
Do they share any processors?
No. The two documents list different processors, so a like-for-like processor build is not possible across these two.
Where these figures come from. DL380 Gen10: HPE ProLiant DL380 Gen10 Server QuickSpecs (a00008180enw, Version 77, 16 June 2025) (HPE document). DL380a Gen11: HPE ProLiant DL380a Gen11 QuickSpecs (Version 34 - August 3, 2026) (HPE document). Each claim on this page is derived from those documents, checked page by page on the two data sheets, and carries no pricing.