Head-to-head · every figure from the vendor documents
Dell R760 vs HPE DL380 Gen10
A specification-by-specification comparison of the Dell PowerEdge R760 and the HPE ProLiant DL380 Gen10, built from Dell’s and HPE’s own documents. 5 headline measures favour the R760, 1 favours the DL380 Gen10, and they share no processors.
Bottom line. R760 leads on virtualisation, databases and in-memory work, storage density, network throughput. DL380 Gen10 leads on AI and acceleration. Neither vendor publishes benchmarks for these machines, so every call here is made on what their documents state.
Each row is a figure both vendors publish. Bars show the split between the two; a badge marks the larger figure, which is not always the better buy — a shallower chassis or a lower power ceiling can matter more.
R7602
Processor sockets
DL380 Gen102
R760128Higher
Cores, fully populated
Largest listed processor × its socket count
DL380 Gen1056
R7608 TBHigher
Memory ceiling
As each document states it
DL380 Gen103 TB
R76028Higher
Drive bays
DL380 Gen1024
R760Up to 6
Accelerators
DL380 Gen10Up to 8Higher
R7603,200 WHigher
Largest power supply
DL380 Gen102,200 W
R7602U Rack
Rack height
DL380 Gen102U Rack
R760200 GbE classHigher
Fastest network option
DL380 Gen10100 GbE class
02 — Verdict
Which one, and why
Drawn from the measures above and each model’s own data sheet. Neither vendor publishes benchmark results for these servers, so nothing here claims one is “faster”.
Choose the R760 if…
Cores, fully populated: 128 against 56 on the DL380 Gen10
Memory ceiling: 8 TB against 3 TB on the DL380 Gen10
Drive bays: 28 against 24 on the DL380 Gen10
Dell documents 51 processor SKUs, 31 drive-bay layouts and 10 power supplies for this one chassis — far more choice than the R760xs, R760xd2 or R760xa siblings.
Choose the DL380 Gen10 if…
Accelerators: Up to 8 against Up to 6 on the R760
Expansion is the whole argument for this chassis. Three riser positions carry as many as eight PCIe 3.0 slots, and the pair of x16/x16/x16 GPU riser kits each take three single-width accelerators — six across two processors. The 1U DL360 Gen10, built from the identical processor table, reaches three slots in total.
03 — By workload
Where each one pulls ahead
Calls made on documented capacity only — cores, memory, bays, accelerators and network options — with the figures behind each one shown.
VirtualisationR760: 128 cores with 8 TB. DL380 Gen10: 56 cores with 3 TB.R760
Databases & in-memoryMemory ceiling 8 TB against 3 TB, across 32 and 24 DIMM slots.R760
Storage density28 bays in 2U against 24 in 2U.R760
AI & acceleration6 accelerators against 8 in the vendor documents.DL380 Gen10
Network throughputFastest card listed: 200 GbE class against 100 GbE class.R760
04 — Specifications
Side by side, differences first
Everything both documents state, grouped. The default view hides rows where the two machines are identical.
Processors
Every processor each vendor lists for the model, from its own document.
Specification
R760
DL380 Gen10
Processors listed
51
113
Most cores per processor
64
28
Highest processor TDP
350 W
205 W
Processor families
Xeon Max (HBM) · 4th Gen Xeon Scalable · 5th Gen Xeon Scalable
2nd Gen Intel Xeon Scalable (Platinum) · 1st Gen Intel Xeon Scalable (Platinum) · 2nd Gen Intel Xeon Scalable (Gold) · 1st Gen Intel Xeon Scalable (Gold) · 2nd Gen Intel Xeon Scalable (Silver) · 1st Gen Intel Xeon Scalable (Silver) · 2nd Gen Intel Xeon Scalable (Bronze) · 1st Gen Intel Xeon Scalable (Bronze)
RDIMM DDR4-2933 (2nd Gen Intel Xeon Scalable only) · RDIMM DDR4-2666 (1st Gen Intel Xeon Scalable only) · LRDIMM DDR4-2933 · Intel Optane Persistent Memory for HPE (2666 MT/s) + 1 more
Storage
Bay counts are the maximum each document states, including rear and mid-chassis positions.
Specification
R760
DL380 Gen10
Maximum bays
28
24
Documented layouts
30
15
Bay sizes
3.5-inch · 2.5-inch · E3.S
2.5-inch · 3.5-inch
Boot devices
BOSS-N1
HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device · 2 x M.2 SATA on the default primary riser; RAID 1 requires HPE FIO Enable Smart Array SW RAID (784308-B21) · HPE Smart Array S100i SR Gen10 SW RAID (embedded, 14 SATA ports of which 12 accessible) + 1 more
Storage controllers
10
15
Accelerators & I/O
Specification
R760
DL380 Gen10
Accelerators supported
Up to 6
Up to 8
Double-wide cards listed
9
14
OCP slots
1
0
Network cards listed
28
22
Power & platform
Specification
R760
DL380 Gen10
Power-supply options
10
8
Output range
700–3,200 W
500–2,200 W
Input types
AC · 277 VAC / HVDC · −48 V DC
AC · −48 V DC · 277 VAC / HVDC
Management
iDRAC9
HPE iLO 5
Chassis depthVendors measure depth differently — see each data sheet
772.13 mm with bezel / 758.29 mm without bezel
SFF drives: 8.73 x 44.54 x 67.94 cm (3.44 x 17.54 x 26.75 in)
05 — The data
Processors, memory, bays and power
The same charts each data sheet carries, drawn to the same scale so the two ranges can be read against each other.
R760: processors by cores and TDP
Xeon Max (HBM) 44th Gen Xeon Scalable 335th Gen Xeon Scalable 14Bubble size = L3 cache · hover a bubble for the full SKU
DL380 Gen10: processors by cores and TDP
2nd Gen Intel Xeon Scalable (Platinum) 141st Gen Intel Xeon Scalable (Platinum) 112nd Gen Intel Xeon Scalable (Gold) 471st Gen Intel Xeon Scalable (Gold) 232nd Gen Intel Xeon Scalable (Silver) 91st Gen Intel Xeon Scalable (Silver) 52nd Gen Intel Xeon Scalable (Bronze) 21st Gen Intel Xeon Scalable (Bronze) 2Bubble size = L3 cache · hover a bubble for the full SKU
R760: memory with every slot filled
DL380 Gen10: memory with every slot filled
R760: drive bays
Front panel
Rear module
24 × 2.5" SAS/SATA at the front, plus 4 × 2.5" SAS/SATA at the rear — 28 bays in total.
SAS/SATANVMeSAS/SATA + NVMe
DL380 Gen10: drive bays
Front panel
24 × 2.5" SAS/SATA at the front — 24 bays in total.
SAS/SATANVMeSAS/SATA + NVMe
R760: power supplies
AC277 VAC / HVDC−48 V DC
DL380 Gen10: power supplies
AC277 VAC / HVDC−48 V DC
07 — Questions
R760 vs DL380 Gen10, answered
Is the R760 or the DL380 Gen10 the faster server?
Neither document publishes benchmark results, so this page compares what they do state. The R760 lists 51 processors up to 64 cores at 350 W; the DL380 Gen10 lists 113 up to 28 cores at 205 W. Fully populated that is 128 cores against 56.
Which holds more memory?
The R760 has 32 DIMM slots and a stated ceiling of 8 TB. The DL380 Gen10 has 24 and 3.0 TB.
Which takes more drives?
R760: 28 bays across 30 documented layouts. DL380 Gen10: 24 across 15. Counts include rear and mid-chassis positions where the vendor documents them.
Can either take GPUs?
R760: up to 6 accelerators, 9 double-wide cards listed. DL380 Gen10: up to 8, 14 double-wide listed.
Do they share any processors?
No. The two documents list different processors, so a like-for-like processor build is not possible across these two.
Where these figures come from. R760: Dell PowerEdge R760 Technical Guide (Rev. A06, June 2026) (Dell document). DL380 Gen10: HPE ProLiant DL380 Gen10 Server QuickSpecs (a00008180enw, Version 77, 16 June 2025) (HPE document). Each claim on this page is derived from those documents, checked page by page on the two data sheets, and carries no pricing.